How to project a curve onto a surface in SolidWorks
A projected curve takes a flat sketch and lays it on a model face, giving you a true 3D curve. You can then use it as a sweep path or as a guide for surfacing.
Watch the video for the walkthrough. The written steps below follow the software publisher’s documentation, so menu names may differ slightly from the version in the video.
Before you start
You need a sketch of the curve and a model face to project it onto. Draw the sketch on a plane that faces the surface, such as a plane above a curved top face. Close the sketch before you start the feature.
Project onto a face
- Click Project Curve on the Curves toolbar, or go to Insert, Curve, Projected.
- Under Selections, set the projection type to Sketch on faces.
- For Sketch to Project, pick your sketch.
- For Projection Faces, pick the face to project onto.
- Choose Reverse projection if the preview goes the wrong way, or Bi-directional to project both ways from the sketch.
- Accept the feature. The curve appears in the FeatureManager design tree.
If you select the sketch and the face first, SolidWorks fills these boxes in for you.
Make a curve from two sketches
The Sketch on sketch option finds where two sketches would meet if each was extruded. Draw one profile on each of two intersecting planes, close both, then select both under Sketch to Project. It is a quick way to define a 3D path from a plan and an elevation, which is how many engineers already think about a route.
When it fails
- The sketch curves cross each other. The tool does not support projecting intersecting curves.
- The sketch does not sit over the face in the projection direction, so nothing lands on it. Try Reverse projection, or set a Direction of Projection.
- The sketch has separate groups of entities and only one was selected. Use SelectionManager to pick one continuous group.
Projected curve or Wrap?
A projected curve is reference geometry, so it adds no material. Use it when you need a path. If you want raised or cut lettering on the face, the Wrap feature is usually the better tool.
Questions
Can I edit the curve later?
Yes. Edit the sketch and the curve updates.
Can a 3D sketch be projected?
Yes. The tool accepts 3D sketches as input, and can produce several closed or open curves from a single sketch.
Related: model a spring with a sweep, engrave text in SolidWorks.
Sources
Last checked 9 November 2026 against the documentation listed above. See the disclaimer.