Home · CAD tutorials

How to engrave text in SolidWorks

Part numbers, logos and labels are often cut straight into a model. The right method depends on whether the face is flat or curved.

Watch the video for the walkthrough. The written steps below follow the software publisher’s documentation, so menu names may differ slightly from the version in the video.

On a flat face

  1. Start a sketch on the face.
  2. Add sketch text with Tools, Sketch Entities, Text, then type your text and pick a font.
  3. Position it with construction geometry so it stays where you put it when the part changes.
  4. Use an extruded cut with a blind depth.

On a curved face

  1. Sketch the text on a plane tangent to the face, so the face normal and sketch normal are parallel at the closest point.
  2. Select the sketch, then click Wrap on the Features toolbar, or go to Insert, Features, Wrap.
  3. Under Wrap Type choose Deboss to cut in, Emboss to raise, or Scribe to imprint only.
  4. Choose the Analytical method, select the face and set a thickness.
  5. Use Reverse direction if the feature goes the wrong way.

The Analytical method works for cylindrical and conical shapes. Spline Surface wraps onto any face type, but cannot wrap around a model.

Choosing a font

The sketch for a wrap can contain only closed contours, so open strokes will stop it working. Fonts with thin strokes or tight counters are the most likely to cause trouble. For engraving tools that follow a single line, use a single-line font with the Scribe option, which is designed for that.

When it fails

  • Text overruns an edge of the face.
  • The font creates open or overlapping contours. Try a simpler font.
  • The depth is greater than the wall, which breaks through the part.

Before you send it for manufacture

Ask your machinist or print bureau for the smallest stroke and depth they can produce. Those limits depend on the tool or the printer. Check the text at its true size too, because lettering that looks clear on screen can close up when it is made.

Related: engrave text in Shapr3D, project a curve onto a surface.

Sources

Last checked 9 November 2026 against the documentation listed above. See the disclaimer.